Colored grout of 1 component, cementitious base, suitable for grouting tiles<\/p>\n
Hue:<\/strong>\u00a0See Color Chart FMF 150<\/p>\n Packaging:<\/strong>\u00a0Plastic poke 5kg<\/p>\n Consumption:<\/strong>\u00a0See Technical Brochure (TDS)<\/p>\n Modified with polymeric additives, it consists of cement, quartz sand, calcareous fillers and improvers. Fmf 150 has high mechanical strength and resistance to frost and humidity. It is classified as competent type CG2 based on EN 13888 for internal and external use. It is produced in two types: Step 1<\/strong><\/p>\n The substrate of the paving should be flat, clean of loose and foreign bodies such as plaster residues, paints, oils, etc., without cracks, stable and free from shrinkage and deformation tendencies. In addition, it should not be subjected to vibrations. Suitable substrates are concrete, self-leveling floors, cement mortar light concrete, bricks, poropeton, cement blocks and cement \u2013 lime plasters.<\/p>\n Step 2<\/strong><\/p>\n In a clean container add 1.05 \u2013 1.10 liters of pure water for fine grain (\u039d\u03bf 301-326) and 1.50 \u2013 1.55 liters of pure water for the coarse grain (No 501-525)<\/p>\n Step 3<\/strong><\/p>\n Gradually empty the contents of a 5 Kg bag of FMF 150 product, stirring continuously with an electric stirrer to obtain a homogeneous mass of mortar<\/p>\n Step 4<\/strong><\/p>\n Let the resulting mixture ripen for 5 minutes and stir it a little again<\/p>\n Step 5<\/strong><\/p>\n The mixture is ready for use for the next 1 hour. After the preparation of the mixture, it is forbidden to add additional water to correct the workability of the mortar. This would lead to a decrease in its strength and an increase in its shrinkage.<\/p>\n Step 6<\/strong><\/p>\n Apply FMF 150 on the surface and with the special elastic spatula helping it to penetrate the joints, with diagonal and crossed movements<\/p>\n Step 7<\/strong><\/p>\n Clean the excess grout from the joints with a wet sponge<\/p>\n Step 8<\/strong><\/p>\n When the grout pulls enough, rub the entire surface with a sponge and form the surface of the joint<\/p>\n Step 9<\/strong><\/p>\n After the grout has tightened, rub and smooth the surface of the joints with a damp cloth, giving their final appearance<\/p>\n Step 10<\/strong><\/p>\n This is followed by mopping of the surface of the tiles and removal of the remnants of materials and pollutants. The use of detergents and other caustic cleaning should be applied after the complete drying of the grout. During the application and during the next 24 hours the temperature of the environment and the substrate should be between +5C and +35C<\/p>\n Step 11<\/strong><\/p>\n The grout when it is still fresh is cleaned with water. When hardened it is mechanically removed<\/p>\n It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0\u00b0C for 12 months from the date of production<\/p>","protected":false},"featured_media":3381,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_cat":[31,54],"product_tag":[],"yoast_head":"\nDescription<\/h3>\n
\nFine-grained for joint thickness up to 5mm<\/strong>
\nChondrococcus for joint thickness 5-20mm
\n<\/strong><\/p>\nFields of Application<\/h3>\n
\n
Advantages<\/h3>\n
\n
Implementation Steps<\/h3>\n
Storage<\/h3>\n