BAUER Superfix 7 Ultrafine acrylic spatula putty
€5.00 – €12.00
Ultrafine acrylic spatula putty to create a perfectly smooth surface on walls and ceilings. For indoor and outdoor use on surfaces of plaster, drywall or concrete to be covered with paint. It spreads softly, scrubs easily, has great performance and offers perfectly smooth and durable surfaces.
• Dries quickly and does not pop
• Particularly fine-grained for extremely smooth surface (0.05 mm maximum grain)
• No priming needed before its application
• Has great transpiration ability
Form: cementitious base dry mortar
Available in : 5kg, 20kg WHITE
| color | white |
|---|---|
| weight | 5kg, 20kg |
Related Products
Reinforced, cement-shaped base, water repellent and high strength, grout of tiles.
It offers unique color stability, unsurpassed resistance to stresses, with bacteriostatic properties that do not allow the creation of bacteria. Highly resistant to dirt and easy to clean.
Suitable for grouting ceramic tiles, ceramic granites, glazing and natural stones on any substrate, for indoor or outdoor use on walls or floors. Its rheological properties and advanced composition offer quick filling of joints and very easy cleaning of residues.
It is classified as reinforced grout, waterproof and highly resistant to abrasion type CG2 WA according to the European directive EN 13888.
Form: dry mortar in 16 colors
Density of mixture with water: ≈2,0 kg/l
Available in : 5kg
Out of stock
Ready cementitious base plaster suitable for the mud (flattening) of surfaces before applying coatings
Hue: Gray
Packaging: Paper bag 25Kg and 40kg
Big Bag for thrakon silo
Consumption: 14-15 kg/m² for an application thickness of 1.0 cm
Description
GHP 210 product is a ready-made cementitious base plaster suitable for the mudling (flattening) of surfaces before applying finished or decorative layer coatings. It consists of cement, hydrated, quartz sand with a maximum granule of 2.5mm, inorganic fillers and improvers. The GHP 210 has very strong adhesion to all common substrates. It is produced and controlled according to the European standard EN 998-1.
Application thickness 1.0 cm
Κοκκομετρία: 2,5 mm max
For details of application consult the product technical brochure (TDS)
Fields of Application
- Suitable for use as basic layer plaster in THRAKON's 3-layer plastering system
- Suitable for use as plaster of a layer if the conditions allow it and the final surface it gives is acceptable. Applied on a thin layer of discarded plaster of THRAKON SHP 205
Advantages
- Produced with silicate sand
- It has excellent granulometric distribution
- Allows surfaces to "breathe"
- Strong adhesion to the substrate
- Excellent workability
- It stands on the surface of the structural element without hanging
- High strength – Fast application
- Replaces traditional plasters
- CE certified – according to the European standard EN 998-1
Storage
It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0C for 12 months from the date of production
Out of stock
High-standard cement-based tile adhesive.
For welding ceramic tiles on walls and floors.
Ideal for concrete surfaces, cement mortar, brickwork, plasters, etc.
With resistance to frost and moisture.
It offers increased thixotropy during application and low sliding when tiles are placed on vertical surfaces.
For indoors and outdoors.
It is classified as an enhanced glue of type C2T in accordance with the European Directive EN 12004.
Available in : 5kg, 25kg WHITE
Out of stock
Colored grout of 1 component, cementitious base, suitable for grouting tiles
Hue: See Color Chart FMF 150
Packaging: Plastic poke 5kg
Consumption: See Technical Brochure (TDS)
Description
Modified with polymeric additives, it consists of cement, quartz sand, calcareous fillers and improvers. Fmf 150 has high mechanical strength and resistance to frost and humidity. It is classified as competent type CG2 based on EN 13888 for internal and external use. It is produced in two types:
Fine-grained for joint thickness up to 5mm
Chondrococcus for joint thickness 5-20mm
Fields of Application
- Suitable for grouting absorbent and non-absorbent tiles (e.g. granites) on all common substrates, on horizontal or vertical surfaces, in dry and wet areas
- Suitable for indoor and outdoor use
Advantages
- Produced with quartz sand
- Strong adhesion to demanding substrates
- Abrasion resistance
- Excellent workability
- Quick implementation
- Resistance to moisture and frost
- Produced and controlled according to the European standard EN 13888
Implementation Steps
Step 1
The substrate of the paving should be flat, clean of loose and foreign bodies such as plaster residues, paints, oils, etc., without cracks, stable and free from shrinkage and deformation tendencies. In addition, it should not be subjected to vibrations. Suitable substrates are concrete, self-leveling floors, cement mortar light concrete, bricks, poropeton, cement blocks and cement – lime plasters.
Step 2
In a clean container add 1.05 – 1.10 liters of pure water for fine grain (Νο 301-326) and 1.50 – 1.55 liters of pure water for the coarse grain (No 501-525)
Step 3
Gradually empty the contents of a 5 Kg bag of FMF 150 product, stirring continuously with an electric stirrer to obtain a homogeneous mass of mortar
Step 4
Let the resulting mixture ripen for 5 minutes and stir it a little again
Step 5
The mixture is ready for use for the next 1 hour. After the preparation of the mixture, it is forbidden to add additional water to correct the workability of the mortar. This would lead to a decrease in its strength and an increase in its shrinkage.
Step 6
Apply FMF 150 on the surface and with the special elastic spatula helping it to penetrate the joints, with diagonal and crossed movements
Step 7
Clean the excess grout from the joints with a wet sponge
Step 8
When the grout pulls enough, rub the entire surface with a sponge and form the surface of the joint
Step 9
After the grout has tightened, rub and smooth the surface of the joints with a damp cloth, giving their final appearance
Step 10
This is followed by mopping of the surface of the tiles and removal of the remnants of materials and pollutants. The use of detergents and other caustic cleaning should be applied after the complete drying of the grout. During the application and during the next 24 hours the temperature of the environment and the substrate should be between +5C and +35C
Step 11
The grout when it is still fresh is cleaned with water. When hardened it is mechanically removed
Storage
It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0°C for 12 months from the date of production
Out of stock
Description
It is suitable for spatulating internal and external surfaces. It eliminates the traditional putties and oily ones. It does not prevent the transpiration of the walls and gives a surface perfectly smooth and white, without squeezing, lines and cracks after drying out. It has very good adhesion to the substrate, dries quickly and rubs easily. It contains appropriately modified polymers that improve the workability of the mortar and increase its strength.
Fields of Application
- Suitable for spatulating internal surfaces on concrete, plaster, cement mortar and generally on fixed surfaces without large bumps
- Eliminates traditional stuccos and oilyards
- The finished surface it gives is smooth and ready for painting or welding wallpaper
Advantages
- Replaces the traditional putties and oily
- Produced with ultra-white limestone aggregates
- Gives extremely smooth surface
- Allows surfaces to "breathe"
- Shows strong adhesion to the substrate
- Exhibits excellent workability and thixotropic behavior
- Standing on the surface of the structural element without flowing
- Easily rubbed
- Does not create stings, lines and cracks after drying
- Provides high strength
- Suitable for quick application
- Produced and controlled according to the European standard EN 998-1
Implementation Steps
Step 1
Ensure that surfaces are clean and free of flimsy. Remove the remains of old plasters. On very absorbent surfaces it is necessary to prior priming with the acrylic primer of THRAKON GLX 290
Step 2
In a clean container add 7-8 liters of clean water and gradually empty the contents of the bag, stirring continuously, so that a homogeneous mass of mortar is obtained. The resulting mixture is ready for use 5 minutes after mixing
Step 3
If during the preparation of the mixture you add 1-2 kg/bag emulsion GLX 296 and the necessary amount of water, the workability is significantly improved and the characteristics of the product are enhanced, such as strength, shrinkage, welding on various surfaces, flexibility, frost resistance, tightness, abrasion resistance and acid resistance
Step 4
The application can be done in two layers. The second layer is applied after the first one dries, after 2-3 hours
Step 5
After 6-12 hours the surface is rubbed and ready for painting
Storage
Kept on pallets, and in a dry environment 12 months from the date of production
Hue: White
Packaging: Paper bag 5kg and 20kg
Consumption: 1,0 kg/m² for two layers
Out of stock
Reviews
There are no reviews yet.