Description

It is suitable for spatulating internal and external surfaces. It eliminates the traditional putties and oily ones. It does not prevent the transpiration of the walls and gives a surface perfectly smooth and white, without squeezing, lines and cracks after drying out. It has very good adhesion to the substrate, dries quickly and rubs easily. It contains appropriately modified polymers that improve the workability of the mortar and increase its strength.

Fields of Application

• Suitable for spatulating internal surfaces on concrete, plaster, cement mortar and generally on fixed surfaces without large bumps
• Eliminates traditional stuccos and oilyards
• The finished surface it gives is smooth and ready for painting or welding wallpaper

Advantages

• Replaces the traditional putties and oily
• Produced with ultra-white limestone aggregates
• Gives extremely smooth surface
• Allows surfaces to "breathe"
• Shows strong adhesion to the substrate
• Exhibits excellent workability and thixotropic behavior
• Standing on the surface of the structural element without flowing
• Easily rubbed
• Does not create stings, lines and cracks after drying
• Provides high strength
• Suitable for quick application
• Produced and controlled according to the European standard EN 998-1

Implementation Steps

Step 1

Ensure that surfaces are clean and free of flimsy. Remove the remains of old plasters. On very absorbent surfaces it is necessary to prior priming with the acrylic primer of THRAKON GLX 290

Step 2

In a clean container add 7-8 liters of clean water and gradually empty the contents of the bag, stirring continuously, so that a homogeneous mass of mortar is obtained. The resulting mixture is ready for use 5 minutes after mixing

Step 3

If during the preparation of the mixture you add 1-2 kg/bag emulsion GLX 296 and the necessary amount of water, the workability is significantly improved and the characteristics of the product are enhanced, such as strength, shrinkage, welding on various surfaces, flexibility, frost resistance, tightness, abrasion resistance and acid resistance

Step 4

The application can be done in two layers. The second layer is applied after the first one dries, after 2-3 hours

Step 5

After 6-12 hours the surface is rubbed and ready for painting

Storage

Kept on pallets, and in a dry environment 12 months from the date of production

Hue: White

Packaging: Paper bag 5kg and 20kg

Consumption: 1,0 kg/m² for two layers

Ready cementitious base plaster suitable for the mud (flattening) of surfaces before applying coatings

Hue: Gray

Packaging: Paper bag 25Kg and 40kg
Big Bag for thrakon silo

Consumption: 14-15 kg/m² for an application thickness of 1.0 cm

Description

GHP 210 product is a ready-made cementitious base plaster suitable for the mudling (flattening) of surfaces before applying finished or decorative layer coatings. It consists of cement, hydrated, quartz sand with a maximum granule of 2.5mm, inorganic fillers and improvers. The GHP 210 has very strong adhesion to all common substrates. It is produced and controlled according to the European standard EN 998-1.

Application thickness 1.0 cm

Κοκκομετρία: 2,5 mm max

For details of application consult the product technical brochure (TDS)

Fields of Application

• Suitable for use as basic layer plaster in THRAKON's 3-layer plastering system
• Suitable for use as plaster of a layer if the conditions allow it and the final surface it gives is acceptable. Applied on a thin layer of discarded plaster of THRAKON SHP 205

Advantages

• Produced with silicate sand
• It has excellent granulometric distribution
• Allows surfaces to "breathe"
• Strong adhesion to the substrate
• Excellent workability
• It stands on the surface of the structural element without hanging
• High strength – Fast application
• Replaces traditional plasters
• CE certified – according to the European standard EN 998-1

Storage

It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0C for 12 months from the date of production