8 results

  • Sort by
    ...
  • BAUER Extra High standard cementitious base tile adhesive 4.009.00

    High-standard cement-based tile adhesive.
    For welding ceramic tiles on walls and floors.
    Ideal for concrete surfaces, cement mortar, brickwork, plasters, etc.
    With resistance to frost and moisture.
    It offers increased thixotropy during application and low sliding when tiles are placed on vertical surfaces.
    For indoors and outdoors.
    It is classified as an enhanced glue of type C2T in accordance with the European Directive EN 12004.

    Available in : 5kg, 25kg WHITE

    High-standard cement-based tile adhesive.
    For welding ceramic tiles on walls and floors.
    Ideal for concrete surfaces, cement mortar, brickwork, plasters, etc.
    With resistance to frost and moisture.
    It offers increased thixotropy during application and low sliding when tiles are placed on vertical surfaces.
    For indoors and outdoors.
    It is classified as an enhanced glue of type C2T in accordance with the European Directive EN 12004.

    Available in : 5kg, 25kg WHITE

    Out of stock

    Quick View
  • Sold Out
    BAUER Perla 0-8mm
    BAUER Perla 0-8mm Reinforced, cement-shaped base, water repellent and high strength, tile grout 8.00

    Reinforced, cement-shaped base, water repellent and high strength, grout of tiles.
    It offers unique color stability, unsurpassed resistance to stresses, with bacteriostatic properties that do not allow the creation of bacteria. Highly resistant to dirt and easy to clean.
    Suitable for grouting ceramic tiles, ceramic granites, glazing and natural stones on any substrate, for indoor or outdoor use on walls or floors. Its rheological properties and advanced composition offer quick filling of joints and very easy cleaning of residues.
    It is classified as reinforced grout, waterproof and highly resistant to abrasion type CG2 WA according to the European directive EN 13888.
    Form: dry mortar in 16 colors
    Density of mixture with water: ≈2,0 kg/l

    Available in : 5kg

    Reinforced, cement-shaped base, water repellent and high strength, grout of tiles.
    It offers unique color stability, unsurpassed resistance to stresses, with bacteriostatic properties that do not allow the creation of bacteria. Highly resistant to dirt and easy to clean.
    Suitable for grouting ceramic tiles, ceramic granites, glazing and natural stones on any substrate, for indoor or outdoor use on walls or floors. Its rheological properties and advanced composition offer quick filling of joints and very easy cleaning of residues.
    It is classified as reinforced grout, waterproof and highly resistant to abrasion type CG2 WA according to the European directive EN 13888.
    Form: dry mortar in 16 colors
    Density of mixture with water: ≈2,0 kg/l

    Available in : 5kg

    Out of stock

    Quick View
  • BAUER Superfix 7 Ultrafine acrylic spatula putty 5.0012.00

    Ultrafine acrylic spatula putty to create a perfectly smooth surface on walls and ceilings. For indoor and outdoor use on surfaces of plaster, drywall or concrete to be covered with paint. It spreads softly, scrubs easily, has great performance and offers perfectly smooth and durable surfaces.
    • Dries quickly and does not pop
    • Particularly fine-grained for extremely smooth surface (0.05 mm maximum grain)
    • No priming needed before its application
    • Has great transpiration ability
    Form: cementitious base dry mortar

    Available in : 5kg, 20kg WHITE

    Ultrafine acrylic spatula putty to create a perfectly smooth surface on walls and ceilings. For indoor and outdoor use on surfaces of plaster, drywall or concrete to be covered with paint. It spreads softly, scrubs easily, has great performance and offers perfectly smooth and durable surfaces.
    • Dries quickly and does not pop
    • Particularly fine-grained for extremely smooth surface (0.05 mm maximum grain)
    • No priming needed before its application
    • Has great transpiration ability
    Form: cementitious base dry mortar

    Available in : 5kg, 20kg WHITE

    Out of stock

    Quick View
  • Sold Out
    BAUER Ultra acrylic
    BAUER Ultra acrylic High quality resinous cement-based tile adhesive 12.00

    High standard resinous glue of cement-based tiles.
    For bonding tiles of all types, natural stones and tiles of large dimensions on walls and floors.
    Ideal for concrete surfaces, cement mortar, brickwork, plasters, etc.
    Excellent resistance to frost and moisture.
    It offers increased thixotropy during application and low sliding when tiles are placed on vertical surfaces.
    It offers great open application time for greater speed and safety in installation.
    It is classified as an enhanced glue type C2TE according to the European Directive EN 12004.

    Available in : 25kg WHITE

    High standard resinous glue of cement-based tiles.
    For bonding tiles of all types, natural stones and tiles of large dimensions on walls and floors.
    Ideal for concrete surfaces, cement mortar, brickwork, plasters, etc.
    Excellent resistance to frost and moisture.
    It offers increased thixotropy during application and low sliding when tiles are placed on vertical surfaces.
    It offers great open application time for greater speed and safety in installation.
    It is classified as an enhanced glue type C2TE according to the European Directive EN 12004.

    Available in : 25kg WHITE

    Out of stock

    Quick View
  • THRAKON DEC 470 Fine-grained Spatularos Putty – Indoor & Outdoor 4.7011.00

    Description

    It is suitable for spatulating internal and external surfaces. It eliminates the traditional putties and oily ones. It does not prevent the transpiration of the walls and gives a surface perfectly smooth and white, without squeezing, lines and cracks after drying out. It has very good adhesion to the substrate, dries quickly and rubs easily. It contains appropriately modified polymers that improve the workability of the mortar and increase its strength.

    Fields of Application

    • Suitable for spatulating internal surfaces on concrete, plaster, cement mortar and generally on fixed surfaces without large bumps
    • Eliminates traditional stuccos and oilyards
    • The finished surface it gives is smooth and ready for painting or welding wallpaper

    Advantages

    • Replaces the traditional putties and oily
    • Produced with ultra-white limestone aggregates
    • Gives extremely smooth surface
    • Allows surfaces to "breathe"
    • Shows strong adhesion to the substrate
    • Exhibits excellent workability and thixotropic behavior
    • Standing on the surface of the structural element without flowing
    • Easily rubbed
    • Does not create stings, lines and cracks after drying
    • Provides high strength
    • Suitable for quick application
    • Produced and controlled according to the European standard EN 998-1

    Implementation Steps

    Step 1

    Ensure that surfaces are clean and free of flimsy. Remove the remains of old plasters. On very absorbent surfaces it is necessary to prior priming with the acrylic primer of THRAKON GLX 290

    Step 2

    In a clean container add 7-8 liters of clean water and gradually empty the contents of the bag, stirring continuously, so that a homogeneous mass of mortar is obtained. The resulting mixture is ready for use 5 minutes after mixing

    Step 3

    If during the preparation of the mixture you add 1-2 kg/bag emulsion GLX 296 and the necessary amount of water, the workability is significantly improved and the characteristics of the product are enhanced, such as strength, shrinkage, welding on various surfaces, flexibility, frost resistance, tightness, abrasion resistance and acid resistance

    Step 4

    The application can be done in two layers. The second layer is applied after the first one dries, after 2-3 hours

    Step 5

    After 6-12 hours the surface is rubbed and ready for painting

    Storage

    Kept on pallets, and in a dry environment 12 months from the date of production

    Hue: White

    Packaging: Paper bag 5kg and 20kg

    Consumption: 1,0 kg/m² for two layers

    Description

    It is suitable for spatulating internal and external surfaces. It eliminates the traditional putties and oily ones. It does not prevent the transpiration of the walls and gives a surface perfectly smooth and white, without squeezing, lines and cracks after drying out. It has very good adhesion to the substrate, dries quickly and rubs easily. It contains appropriately modified polymers that improve the workability of the mortar and increase its strength.

    Fields of Application

    • Suitable for spatulating internal surfaces on concrete, plaster, cement mortar and generally on fixed surfaces without large bumps
    • Eliminates traditional stuccos and oilyards
    • The finished surface it gives is smooth and ready for painting or welding wallpaper

    Advantages

    • Replaces the traditional putties and oily
    • Produced with ultra-white limestone aggregates
    • Gives extremely smooth surface
    • Allows surfaces to "breathe"
    • Shows strong adhesion to the substrate
    • Exhibits excellent workability and thixotropic behavior
    • Standing on the surface of the structural element without flowing
    • Easily rubbed
    • Does not create stings, lines and cracks after drying
    • Provides high strength
    • Suitable for quick application
    • Produced and controlled according to the European standard EN 998-1

    Implementation Steps

    Step 1

    Ensure that surfaces are clean and free of flimsy. Remove the remains of old plasters. On very absorbent surfaces it is necessary to prior priming with the acrylic primer of THRAKON GLX 290

    Step 2

    In a clean container add 7-8 liters of clean water and gradually empty the contents of the bag, stirring continuously, so that a homogeneous mass of mortar is obtained. The resulting mixture is ready for use 5 minutes after mixing

    Step 3

    If during the preparation of the mixture you add 1-2 kg/bag emulsion GLX 296 and the necessary amount of water, the workability is significantly improved and the characteristics of the product are enhanced, such as strength, shrinkage, welding on various surfaces, flexibility, frost resistance, tightness, abrasion resistance and acid resistance

    Step 4

    The application can be done in two layers. The second layer is applied after the first one dries, after 2-3 hours

    Step 5

    After 6-12 hours the surface is rubbed and ready for painting

    Storage

    Kept on pallets, and in a dry environment 12 months from the date of production

    Hue: White

    Packaging: Paper bag 5kg and 20kg

    Consumption: 1,0 kg/m² for two layers

    Out of stock

    Quick View
  • THRAKON FMF 150 Colored Grout 5.50

    Colored grout of 1 component, cementitious base, suitable for grouting tiles

    Hue: See Color Chart FMF 150

    Packaging: Plastic poke 5kg

    Consumption: See Technical Brochure (TDS)

    Description

    Modified with polymeric additives, it consists of cement, quartz sand, calcareous fillers and improvers. Fmf 150 has high mechanical strength and resistance to frost and humidity. It is classified as competent type CG2 based on EN 13888 for internal and external use. It is produced in two types:
    Fine-grained for joint thickness up to 5mm
    Chondrococcus for joint thickness 5-20mm

    Fields of Application

    • Suitable for grouting absorbent and non-absorbent tiles (e.g. granites) on all common substrates, on horizontal or vertical surfaces, in dry and wet areas
    • Suitable for indoor and outdoor use

    Advantages

    • Produced with quartz sand
    • Strong adhesion to demanding substrates
    • Abrasion resistance
    • Excellent workability
    • Quick implementation
    • Resistance to moisture and frost
    • Produced and controlled according to the European standard EN 13888

    Implementation Steps

    Step 1

    The substrate of the paving should be flat, clean of loose and foreign bodies such as plaster residues, paints, oils, etc., without cracks, stable and free from shrinkage and deformation tendencies. In addition, it should not be subjected to vibrations. Suitable substrates are concrete, self-leveling floors, cement mortar light concrete, bricks, poropeton, cement blocks and cement – lime plasters.

    Step 2

    In a clean container add 1.05 – 1.10 liters of pure water for fine grain (Νο 301-326) and 1.50 – 1.55 liters of pure water for the coarse grain (No 501-525)

    Step 3

    Gradually empty the contents of a 5 Kg bag of FMF 150 product, stirring continuously with an electric stirrer to obtain a homogeneous mass of mortar

    Step 4

    Let the resulting mixture ripen for 5 minutes and stir it a little again

    Step 5

    The mixture is ready for use for the next 1 hour. After the preparation of the mixture, it is forbidden to add additional water to correct the workability of the mortar. This would lead to a decrease in its strength and an increase in its shrinkage.

    Step 6

    Apply FMF 150 on the surface and with the special elastic spatula helping it to penetrate the joints, with diagonal and crossed movements

    Step 7

    Clean the excess grout from the joints with a wet sponge

    Step 8

    When the grout pulls enough, rub the entire surface with a sponge and form the surface of the joint

    Step 9

    After the grout has tightened, rub and smooth the surface of the joints with a damp cloth, giving their final appearance

    Step 10

    This is followed by mopping of the surface of the tiles and removal of the remnants of materials and pollutants. The use of detergents and other caustic cleaning should be applied after the complete drying of the grout. During the application and during the next 24 hours the temperature of the environment and the substrate should be between +5C and +35C

    Step 11

    The grout when it is still fresh is cleaned with water. When hardened it is mechanically removed

    Storage

    It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0°C for 12 months from the date of production

    Colored grout of 1 component, cementitious base, suitable for grouting tiles

    Hue: See Color Chart FMF 150

    Packaging: Plastic poke 5kg

    Consumption: See Technical Brochure (TDS)

    Description

    Modified with polymeric additives, it consists of cement, quartz sand, calcareous fillers and improvers. Fmf 150 has high mechanical strength and resistance to frost and humidity. It is classified as competent type CG2 based on EN 13888 for internal and external use. It is produced in two types:
    Fine-grained for joint thickness up to 5mm
    Chondrococcus for joint thickness 5-20mm

    Fields of Application

    • Suitable for grouting absorbent and non-absorbent tiles (e.g. granites) on all common substrates, on horizontal or vertical surfaces, in dry and wet areas
    • Suitable for indoor and outdoor use

    Advantages

    • Produced with quartz sand
    • Strong adhesion to demanding substrates
    • Abrasion resistance
    • Excellent workability
    • Quick implementation
    • Resistance to moisture and frost
    • Produced and controlled according to the European standard EN 13888

    Implementation Steps

    Step 1

    The substrate of the paving should be flat, clean of loose and foreign bodies such as plaster residues, paints, oils, etc., without cracks, stable and free from shrinkage and deformation tendencies. In addition, it should not be subjected to vibrations. Suitable substrates are concrete, self-leveling floors, cement mortar light concrete, bricks, poropeton, cement blocks and cement – lime plasters.

    Step 2

    In a clean container add 1.05 – 1.10 liters of pure water for fine grain (Νο 301-326) and 1.50 – 1.55 liters of pure water for the coarse grain (No 501-525)

    Step 3

    Gradually empty the contents of a 5 Kg bag of FMF 150 product, stirring continuously with an electric stirrer to obtain a homogeneous mass of mortar

    Step 4

    Let the resulting mixture ripen for 5 minutes and stir it a little again

    Step 5

    The mixture is ready for use for the next 1 hour. After the preparation of the mixture, it is forbidden to add additional water to correct the workability of the mortar. This would lead to a decrease in its strength and an increase in its shrinkage.

    Step 6

    Apply FMF 150 on the surface and with the special elastic spatula helping it to penetrate the joints, with diagonal and crossed movements

    Step 7

    Clean the excess grout from the joints with a wet sponge

    Step 8

    When the grout pulls enough, rub the entire surface with a sponge and form the surface of the joint

    Step 9

    After the grout has tightened, rub and smooth the surface of the joints with a damp cloth, giving their final appearance

    Step 10

    This is followed by mopping of the surface of the tiles and removal of the remnants of materials and pollutants. The use of detergents and other caustic cleaning should be applied after the complete drying of the grout. During the application and during the next 24 hours the temperature of the environment and the substrate should be between +5C and +35C

    Step 11

    The grout when it is still fresh is cleaned with water. When hardened it is mechanically removed

    Storage

    It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0°C for 12 months from the date of production

    Out of stock

    Quick View
  • THRAKON GHP 210 Basic Layer Plaster 7.50

    Ready cementitious base plaster suitable for the mud (flattening) of surfaces before applying coatings

    Hue: Gray

    Packaging: Paper bag 25Kg and 40kg
    Big Bag for thrakon silo

    Consumption: 14-15 kg/m² for an application thickness of 1.0 cm

    Description

    GHP 210 product is a ready-made cementitious base plaster suitable for the mudling (flattening) of surfaces before applying finished or decorative layer coatings. It consists of cement, hydrated, quartz sand with a maximum granule of 2.5mm, inorganic fillers and improvers. The GHP 210 has very strong adhesion to all common substrates. It is produced and controlled according to the European standard EN 998-1.

    Application thickness 1.0 cm

    Κοκκομετρία: 2,5 mm max

    For details of application consult the product technical brochure (TDS)

    Fields of Application

    • Suitable for use as basic layer plaster in THRAKON's 3-layer plastering system
    • Suitable for use as plaster of a layer if the conditions allow it and the final surface it gives is acceptable. Applied on a thin layer of discarded plaster of THRAKON SHP 205

    Advantages

    • Produced with silicate sand
    • It has excellent granulometric distribution
    • Allows surfaces to "breathe"
    • Strong adhesion to the substrate
    • Excellent workability
    • It stands on the surface of the structural element without hanging
    • High strength – Fast application
    • Replaces traditional plasters
    • CE certified – according to the European standard EN 998-1

    Storage

    It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0C for 12 months from the date of production

    Ready cementitious base plaster suitable for the mud (flattening) of surfaces before applying coatings

    Hue: Gray

    Packaging: Paper bag 25Kg and 40kg
    Big Bag for thrakon silo

    Consumption: 14-15 kg/m² for an application thickness of 1.0 cm

    Description

    GHP 210 product is a ready-made cementitious base plaster suitable for the mudling (flattening) of surfaces before applying finished or decorative layer coatings. It consists of cement, hydrated, quartz sand with a maximum granule of 2.5mm, inorganic fillers and improvers. The GHP 210 has very strong adhesion to all common substrates. It is produced and controlled according to the European standard EN 998-1.

    Application thickness 1.0 cm

    Κοκκομετρία: 2,5 mm max

    For details of application consult the product technical brochure (TDS)

    Fields of Application

    • Suitable for use as basic layer plaster in THRAKON's 3-layer plastering system
    • Suitable for use as plaster of a layer if the conditions allow it and the final surface it gives is acceptable. Applied on a thin layer of discarded plaster of THRAKON SHP 205

    Advantages

    • Produced with silicate sand
    • It has excellent granulometric distribution
    • Allows surfaces to "breathe"
    • Strong adhesion to the substrate
    • Excellent workability
    • It stands on the surface of the structural element without hanging
    • High strength – Fast application
    • Replaces traditional plasters
    • CE certified – according to the European standard EN 998-1

    Storage

    It is kept stored in wooden pallets and in a dry environment with a temperature greater than 0C for 12 months from the date of production

    Out of stock

    Quick View
  • THRAKON WRM 550 Fast-Paced Repair Plaster 3.809.50

    The product WRM 550 is a white, fast-paced, repairing plaster of a cementitious base. It is a non-shrinking material with excellent consistency with concrete, masonry and old plasters. It consists of cement, hydrated lime, marble and improvers. It is ideal for all kinds of plaster repairs for indoor and outdoor use. After mixing with water arises a paste that. After mixing with water, a paste emerges that can be applied with a trowel or a metal spatula and with a continuous mixing plastering machine. The pulling time of the plaster is shorter than the common plasters. It has a strength of more than twice the conventional plasters and meets the requirements for repairs. It is produced and controlled according to the European standard EN 998-1.

    Fields of Application

    • Suitable for plastering in old and new constructions
    • Suitable for small repairs
    • Suitable for hole sealing
    • Suitable for repairing broken pieces of plaster
    • Suitable for wide cracks and broken corners

     

    Advantages

    • It is fast paced (30min)
    • Fast strength development (24 hours)
    • Strong adhesion to the substrate
    • Zero shrinkage
    • It is water-repellent
    • High strength – Fast application
    • Allows surfaces to "breathe"
    • Excellent workability
    • Produced with quartz sand
    • Resistance to moisture and vapors

    The product WRM 550 is a white, fast-paced, repairing plaster of a cementitious base. It is a non-shrinking material with excellent consistency with concrete, masonry and old plasters. It consists of cement, hydrated lime, marble and improvers. It is ideal for all kinds of plaster repairs for indoor and outdoor use. After mixing with water arises a paste that. After mixing with water, a paste emerges that can be applied with a trowel or a metal spatula and with a continuous mixing plastering machine. The pulling time of the plaster is shorter than the common plasters. It has a strength of more than twice the conventional plasters and meets the requirements for repairs. It is produced and controlled according to the European standard EN 998-1.

    Fields of Application

    • Suitable for plastering in old and new constructions
    • Suitable for small repairs
    • Suitable for hole sealing
    • Suitable for repairing broken pieces of plaster
    • Suitable for wide cracks and broken corners

     

    Advantages

    • It is fast paced (30min)
    • Fast strength development (24 hours)
    • Strong adhesion to the substrate
    • Zero shrinkage
    • It is water-repellent
    • High strength – Fast application
    • Allows surfaces to "breathe"
    • Excellent workability
    • Produced with quartz sand
    • Resistance to moisture and vapors

    Out of stock

    Quick View
Close My Cart
Close Wishlist
Recently Viewed Close
Close

Close
Navigation
Categories
X